Vortex Optics Pro Series Riflescope Rings

From the brand, our story has always started with you. Every time your heart skips a beat when you're glassing a mountain and that bull appears; every time you bring us along for range day; and every time you trust us in the line of duty, you're telling the story of what it means to belong to Vortex Nation.

Riflescopes Visit the Store Rings & Mounts Visit the Store Scope Accessories Visit the Store Red Dots Visit the Store Binoculars Visit the Store Rangefinders Visit the Store Spotting Scopes Visit the Store Tripods & Mounts Visit the Store Apparel & Gear Visit the Store Vortex Golf Visit the Store

From the manufacturer, the installation instructions for the Vortex Pro Series Rings are as follows:

1. Remove the upper ring halves (keeping them paired as packaged) and place aside.
2. Loosen the base screws and fit the lower halves onto a Weaver or Picatinny base.
3. Position to allow proper riflescope placement for eye relief and even spacing on the riflescope tube.
4. Individually tighten both base clamp screws while pressing the ring half down and forward, toward the muzzle, ensuring it is seated against a cross-slot in the rail. Tighten base clamp screws to 30 in-lbs.
5. Place the riflescope onto the lower ring halves and loosely reattach the upper ring halves to the lower ring halves.
6. Slide and rotate the riflescope for proper head position, eye relief, and vertical reticle alignment.
7. With the riflescope properly positioned, alternately tighten the ring screws in a crisscross pattern. Tighten screws to 15-18 in-lbs while maintaining even spacing between the ring halves.

Note: Do not apply thread locker to the screws. Thread locking agents lubricate the threads, which can increase the applied torque.

ATTENTION: To properly mount your riflescope, we highly recommend using an inch-pound torque wrench. DO NOT exceed 18 in-lbs of torque on the ring's screws.

These Vortex Pro Series Rings position the center of the riflescope tube at a height of 1.0 Inches (25.4 mm) from the base. Sold two rings per package. Made in the USA.

The finishing touch to your rifle and optic combination. Pro Series rings combine rock-solid reliability and strength with high-quality machining to ensure ultimate accuracy and consistency.

Streamlined, lightweight, and durable, these rings use four T-25 Torx-style socket cap screws for secure mounting.

Fits Weaver and Picatinny Rails | Weight (Per Ring): 48.7 Grams - 1.72 oz

Backed by our unlimited, unconditional, lifetime, VIP Warranty. A fully transferable promise to repair or replace your item if it becomes damaged/defective. Does not cover loss, theft, deliberate damage, or cosmetic damage that doesn't hinder performance.

product information: